A pulley is a mechanical device which contains a wheel and rope/belt/chain to lift the heavy objects. The wheel of the pulley is generally fixed to a hinge and rotates on an axle or shaft. In a simple arrangement of the pulley, chain/rope/belt/cable is the driving element that drives over the wheel. At the one end of the rope, the object is loaded, and from the end, when the rope is pulled down the object lifts. To lift large objects an assembly of pulleys are used. These are also used to transfer power from one rotating shaft to another. The advantage of the use of pulleys is that by applying a little force heavy objects can be lifted. In other words, the pulleys multiply the force to lift the heavyweights which cannot be lifted with bare hands.
Types of Pulleys
In the process of doing some work, a pulley is a simple machine that changes the direction and magnitude of the applied force. The rope and pulley system is also known as black and tackle system. There are three types of pulleys,
Fixed: A fixed pulley is mounted on an axle that has bearings at its centre. The wheel of the pulley is fixed on this axle in such a way that it rotates on its centre point. A rope is now surrounded by this wheel so that it can move circumferentially. Sometimes this wheel has grooves which help to rotate the rope around it easily.
Movable: In a movable pulley, the block is mounted on a movable axle which moves along with the weight to be lifted. These pulleys are often attached to the object and multiply the operator’s force which the operator applies to the machine. The movable pulley does not change the direction of the object. It is useful to pull up heavier loads as the operator has to exert less force and the resultant force on the load is the multiplication of the operator’s force.
Compound: In this class of pulleys, several pulleys are fixed and several pulleys are attached to these fixed pulleys with single or multiple ropes. More is the number of wheels less the effort or force to apply to lift heavyweight. This system not only changes the direction of the load but also requires less force to lift heavy objects.
Measurement of the Performance of Pulley
A term mechanical advantage is coined to calculate the effectiveness of the pulleys. The mechanical advantage of a system is the ratio of force utilised to the force applied to the work. To calculate the mechanical advantage of pulley and rope system, it is assumed that the weights of pulleys and ropes are negligible and there is no loss of energy due to friction between rope and wheel’s grooves. And it is also assumed that the ropes/belts/chains used in the operation do not deform (elongate) during the operation.
The mechanical advantage of the pulley system is directly proportional to the number of loops of the rope. In a single loop system, the efforts required to pull the weight is equal to the weight itself. By introducing another loop of rope (adding another wheel attached to the first wheel by additional rope) the effort requires to pull the same weight becomes half as compared to the previous arrangement.
In this case, the mechanical advantage will be 2. If another loop introduced, the effort becomes one third as compared to the first arrangement and therefore, the mechanical advantage is 3. To increase the mechanical advantage, more pulleys can be added. But after a certain number of pulleys, the mechanical advantage does not change and becomes constant.
Advantages and Disadvantages
Advantages
The main advantage in the use of pulleys is that the effort becomes less as compared to the normal lifting of the weights. In other words, it reduces the amount of actual force required to lift heavy objects. It also changes the direction of the force applied. These two advantages in the use pulleys make them an important tool for heavy lifting. It also provides a mechanical advantage.
The other advantage in the use of pulleys is that the distance between the operator and weight. There is a safe distance between them which avoids any disaster. Pulleys are easy to assemble and cost-effective. The combination of different directional pulleys can change the position of the load with little effort. Though there are moving parts in the pulley system they require less or no lubrication after installation.
Disadvantages
Apart from the above-said advantages while using pulley systems, there are several disadvantages in their use. The main disadvantage in the use of the pulley system is that it requires large space to install and operate. The mechanical advantage of pulleys can go to higher values but need more space to install them.
In some cases, the ropes/belts move over the wheel with no grooves, the chances of the slip of ropes/belts from the wheel are inevitable. If the system is installed to use for a long time, they require maintenance and regular check-up of ropes/cables as the friction between the wheels and cables/ropes occur causing wear and tear to them. Continuous use of the system makes the ropes weak. The rope may break while using the system causing damages to the operator, surrounding place and the load which is being lifted.
FAQs on Pulley
Q.1: What is the pulley?
Answer: A mechanical device that reduces the efforts to lift the heavy objects or material with the help of rope and wheel is known as the pulley. In the general arrangement, a pulley is made up of rope or cable wrapped around a wheel which is hinged and fixed.
Q.2: What are the types of pulleys and how they are different from each other?
Answer: There are three types of pulleys, namely, fixed pulleys, movable pulleys, and compound pulleys.
Fixed pulleys are those pulleys that are attached to a single point. As the name suggests that this pulley is stationary and is fixed to support like wall or ceiling and the rope/chain passes through it. These are vital mechanical devices as they change the direction of the object, which is very helpful.
Movable pulleys are different types of pulleys as they move with the object and unlike the fixed pulley; they need little effort to lift the heavy objects. They multiply the effort made on them. The drawback of using these pulleys is that they do not change the direction of the object.
Compound pulleys are the combination of the fixed pulleys and movable pulleys. They have both the qualities of the fixed and movable pulley. They need little force to lift the heaviest objects and they can change the direction of the objects being lifted.
Q.3: Define the mechanical advantage, its type, and how it is used for pulley?
Answer: Any machine’s purpose is to provide a better and increased output for a given input. The mechanical advantage is the term that defines the effectiveness of any machine. There are three types of mechanical advantages: Force, Distance, and Speed. Though the mechanical advantage of simple machines is a significant factor in measuring their performance, it can be used for highly complex machines also.
In the case of pulleys, to measure the performance of the pulleys force mechanical advantage is in use. It defines how effective the pulleys are. In theoretical terms, the mechanical advantage is the ratio of the force utilised to the force applied to the work.